資料載入中.....
|
請使用永久網址來引用或連結此文件:
https://ir.cnu.edu.tw/handle/310902800/32187
|
| 標題: | Kinetics of sulfur removal in high shear mixing-assisted oxidative-adsorptive desulfurization of diesel |
| 作者: | de Luna, Mark Daniel G.
Samaniego, Marvin L.
Ong, Dennis C.
Wan, Meng-Wei
Lu, Ming-Chun |
| 貢獻者: | Univ Philippines, Dept Chem Engn
Univ Philippines, Natl Grad Sch Engn, Environm Engn Program
Univ Philippines, Sch Technol
Chia Nan Univ Pharm & Sci, Dept Environm Resources Management |
| 關鍵字: | Activated carbon
Adsorption
Alumina
Desulfurization
Diesel
Kinetics |
| 日期: | 2018-03-20 |
| 上傳時間: | 2019-11-15 15:44:18 (UTC+8) |
| 出版者: | ELSEVIER SCI LTD |
| 摘要: | Current global environmental regulations require deep desulfurization of prevailing high-sulfur crude oil reserves to limit toxic sulfur oxide emissions during fuel combustion. In this study, deep desulfurization of diesel was carried out in two sequential batch steps: (1) oxidation of refractory sulfur compounds in diesel into sulfones and (2) adsorption of the polar sulfur-species in the resulting organic phase onto commercially available adsorbents. Oxidative desulfurization of diesel was performed in a glass vessel equipped with a high shear mixer set at 12,000 rpm. Phosphotungstic acid, tetraoctylammonium bromide and hydrogen peroxide were used as catalyst, phase transfer agent and oxidant, respectively. Adsorptive desulfurization, on the other hand, was carried out using powdered alumina, granular alumina, powdered activated carbon (PAC), and granular activated carbon (GAC) adsorbents. Characterization results showed that powdered alumina and PAC appear to be aggregates of small crystalline structures, with PAC having larger surface area of 846 m(2) g(-1) compared to powdered alumina at 129 m(2) g(-1). Micropores were detected in PAC, while the porosity of powdered alumina was attributed to the presence of mesopores. Sulfur removal by the four types of adsorbents conformed to the pseudo second order model, implying that chemisorption was the rate-limiting step. The computed adsorption capacities from the kinetic model at 3.47, 1.09, 3 and 1.09 mg g(-1) were in agreement with the experimental adsorption capacities at equilibrium of 3.36, 0.98, 3 and 1 mg g(-1) for powdered alumina, granular alumina, PAC and GAC, respectively. The 2-line Weber-Morris plots of the four adsorbents indicated the effects of boundary layer diffusion and intraparticle diffusion in sulfur removal. The values of k(id1) and k(id2), as well as l(1) and l(2), implied that boundary layer diffusion proceeded at a faster rate than the rate-determining step which was intraparticle diffusion. Higher intraparticle diffusion coefficient values were observed for powdered alumina due to its larger particle size and, consequently, smaller surface area where the sulfur compounds tend to be more readily adsorbed. (C) 2018 Elsevier Ltd. All rights reserved. |
| link: | http://dx.doi.org/10.1016/j.jclepro.2018.01.049 |
| 關聯: | Journal of Cleaner Production, v.178, pp.468-475 |
| 顯示於類別: | [環境資源管理系(所)] 期刊論文
|
文件中的檔案:
| 檔案 |
描述 |
大小 | 格式 | 瀏覽次數 |
|---|
| 10.1016-j.jclepro.2018.01.049.pdf | | 1306Kb | Adobe PDF | 545 | 檢視/開啟 | | index.html | | 0Kb | HTML | 1740 | 檢視/開啟 |
|
在CNU IR中所有的資料項目都受到原著作權保護.
|
