English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18076/20274 (89%)
造訪人次 : 5251918      線上人數 : 1347
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/34399


    標題: Hard Anodization Film on Carbon Steel Surface by Thermal Spray and Anodization Methods
    作者: Chiang, Pao-Chang
    Chen, Chih-Wei
    Tsai, Fa-Ta
    Lin, Chung-Kwei
    Chen, Chien-Chon
    貢獻者: Taipei Med Univ, Sch Dent, Coll Oral Med
    Taipei Med Univ, Wan Fang Hosp, Dept Dent
    Taipei Med Univ, Coll Oral Med, Res Ctr Digital Oral Sci & Technol
    Chi Mei Med Ctr, Div Neurosurg, Dept Surg
    Chia Nan Univ Pharm & Sci, Inst Ind Safety & Disaster Prevent, Dept Occupat Safety & Hlth, Coll Sustainable Environm
    Natl United Univ, Dept Mech Engn
    Natl United Univ, Dept Energy Engn
    關鍵字: carbon steel
    AISI 1045
    corrosion
    hardness
    thermal spray
    anodization
    日期: 2021
    上傳時間: 2023-11-11 11:49:43 (UTC+8)
    出版者: MDPI
    摘要: In this paper, we used two mass-produced industrial technologies, namely, thermal spraying and anodization methods, to enhance the surface characteristics of AISI 1045 medium carbon steel for use in special environments or products. The anodic film can effectively improve the surface properties of carbon steel. A sequence of treatments of the carbon steel substrate surface that consist of sandblasting, spraying the aluminum film, annealing, hot rolling, cleaning, grinding, and polishing can increase the quality of the anodized film. This paper proposes an anodization process for the surface of carbon steel to increase the corrosion resistance, hardness, color diversification, and electrical resistance. The resulting surface improves the hardness (from 170 HV to 524 HV), surface roughness (from 1.26 to 0.15 mu m), coloring (from metal color to various colors), and corrosion resistance (from rusty to corrosion resistant). The electrochemical corrosion studies showed that the AISI 1045 steel surface with a hard anodized film had a lower corrosion current density of 10(-)(5.9) A/cm(2) and a higher impedance of 9000 ohm than those of naked AISI 1045 steel (10(-4.2) A/cm(2) and 150 ohm) in HCl gas.
    關聯: MATERIALS, v.14, n.13
    顯示於類別:[職業安全衛生系(含防災所)] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML308檢視/開啟
    ma14133580.pdf10284KbAdobe PDF137檢視/開啟


    在CNU IR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋