Chia Nan University of Pharmacy & Science Institutional Repository:Item 310902800/34154
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18074/20272 (89%)
造訪人次 : 4082848      線上人數 : 1132
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/34154


    標題: Fixed-bed adsorption of copper from aqueous media using chitosan-coated bentonite, chitosan-coated sand, and chitosan-coated kaolinite
    作者: Futalan, Cybelle M.
    Yang, Jung-Hung
    Phatai, Piaw
    Chen, I-Pin
    Wan, Meng-Wei
    貢獻者: Dong A Univ, Natl Res Ctr Disaster Free & Safe Ocean City
    Chia Nan Univ Pharm & Sci, Dept Environm Engn & Sci
    Udon Thani Rajabhat Univ, Dept Chem, Fac Sci
    Chia Nan Univ Pharm & Sci, Dept Environm Resources Management
    關鍵字: Breakthrough curve
    Chitosan
    Clay
    Fixed-bed
    Mass transfer zone
    Sand
    Thomas model
    日期: 2020
    上傳時間: 2022-11-18 11:26:16 (UTC+8)
    出版者: Springer Heidelberg
    摘要: Fixed-bed studies were performed to evaluate the removal efficiency of copper (Cu(II)) from aqueous solution using chitosan-coated bentonite (CCB), chitosan-coated sand (CCS), and chitosan-coated kaolinite (CCK). The thermal and morphological properties of CCB, CCK, and CCS were characterized using thermogravimetric analysis, Fourier transform infrared spectroscopy, and the Brunauer-Emmett-Teller method. Dynamic experiments were carried out to investigate the effect of solution pH (3.0 to 5.0) and initial Cu(II) concentration (200 to 1000 mg/L) on the time to reach breakthrough (t(b)), total volume of treated effluent (V-eff), and adsorption capacity at breakthrough (q(b)). Results show that increasing the initial Cu(II) concentration inhibits the column performance where lowerV(eff),t(b), andq(b)were obtained. Decreasing the pH from 5.0 to 3.0 led to improved removal efficiency with higher values ofV(eff),t(b), andq(b). Under pH 3.0 and 200 mg/L, the maximum removal efficiency of 68.60%, 56.10%, and 58.90% for Cu(II) was attained using CCB, CCS, and CCK, respectively. The Thomas model was determined to adequately predict the breakthrough curves based on high values of coefficient of determination (R-2 >= 0.8503). Regeneration studies were carried out using 0.1 M HCl and 0.1 M NaOH solution in the saturated column of CCB, CCK, and CCS.
    關聯: Environmental Science and Pollution Research, v.27, n.20, pp.12
    顯示於類別:[環境工程與科學系(所)] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML701檢視/開啟


    在CNU IR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋