臭氧催化反應器之開發及異味去除之應用

CNU IR > College of Sustainable Environment and Recreation > Dept. of Environmental Engineering and Science (including master's program) > MOST Project > Item 310902800/33553

Please use this identifier to cite or link to this item: https://ir.cnu.edu.tw/handle/310902800/33553

Title:	臭氧催化反應器之開發及異味去除之應用 Development of Pilot Scale Ozonation System and the Application of Vaporous Organic Odor Removal
Authors:	陳世雄劉瑞美
Contributors:	嘉藥學校財團法人嘉南藥理大學環境工程與科學系(含碩士班)
Keywords:	臭氧催化反應器揮發物污染物臭味臭氧觸媒催化過度金屬氧化物 catalytic ozonation reactor vapor organic compounds odor catalytic ozonation metals oxides
Date:	2020
Issue Date:	2022-01-13 16:20:41 (UTC+8)
Abstract:	本計畫擬製造出可於低溫下可利用臭氧觸媒催化降解處理揮發性臭味/揮發物污染物之反應裝置。計畫中將錳、銅、鈷、鎳過度金屬氧化物觸媒用於臭氧催化反應，將氧化降解溫度降至工作溫度範圍100℃以下並達成有效分解效率，計畫中將設計組裝完成一可調整反應溫度、臭氧濃度、可調氣體流量之連續式觸媒臭氧催化反應系統，探討揮發性有機污染物濃度及臭味氣體種類、反應溫度、臭氧濃度和空氣含水氣濃度等操作參數對過渡金屬氧化觸媒反應系統對催化分解效能之影響。並就使用溶膠凝膠法過渡金屬氧化觸媒之製備方法進行組成及配方探討，載體則選用拉西環或分子篩增進其反應性與機械強度，以浸漬覆膜法製備過渡金屬氧化觸媒。計畫將以氣相層析儀建立揮發性有機污染物濃度與臭味氣體及降解產物分析技術，包括︰分析條件之確立、分解產物之確定、檢量線之建立等。計畫亦將進行觸媒臭氧催化反應系統之性能測試，內容包括反應器測漏、均相反應性能、載體吸附特性、觸媒重複性測試及過渡金屬氧化觸媒反應活性測試等，反應操作參數包括有機物或臭氣初始濃度、臭氧含量、水氣含量、空間流速及反應溫度等亦將被深入探討。如本計畫順利開展，利用計畫成果創新製造出可用於揮發性有機污染物、臭味氣體及室內有機污染氣體去除之裝置，技術門檻可墊高其他廠商與強氧興業有限公司之競爭距離，本創新計畫可所製備已可延伸應用於各項工業揮發性有廢氣之處理，進而獲取高加值創價成果。 he purpose of this project is to prepare a low temperature for decomposition of vapor organic compounds and organic odors pollutants in the air pollution. The metals oxides (MnOx, CuOx, CoOx, NiOx) were applied as the catalyst and they will be well dispersing on the support material. A good performance on catalytic ozonation for VOCs/odor decomposition can be achieved under the working temperature below 100℃ in the reactor. It is proposed to build up a reactor that is adjustable on reaction temperature, ozone concentration, and gas flow rate for VOCs decomposition. The influent parameters such as organic materials, type of odor, temperature, and humility, will be also discussed on the performance of VOCs decomposition. The metal oxides will synthesize by sol-gel method and they will coated on the ceramics material and molecular sieve to enhance the mechanical strength of catalyst. The dipping process for catalyst preparation will adjust the thickness of metals oxides. The quantitative analysis of VOCs and odor vapor will process by gas chromatography (GC-FID and GC-TCD). The parameters will discussed including analytical condition, qualitative identification, products identification and calibration of pollutants. The performance of catalytic ozonation for VOCs decomposition will also investigated. The parameters include leak test of the reactor, activity of catalysts, adsorption properties of support material, life time of active catalyst. The effective parameters will be also discussed in this project. The new catalytic ozonation reactor can be prepared in this project and well applied for the treatment of industrial VOCs effluent, odors gas treatment, and indoor gas-cleaning machine. The new technology will improve competitiveness of Three oxygen enterprise CO.,Ltd. more than other opponents. This innovative subject can be prepared and can be extended to the treatment of various industrial volatile and exhaust gases, thereby achieving high value-added and cost-effective results.
Relation:	計畫編號：MOST109-2622-E041-004-CC2 計畫年度：109 執行起迄：2020-06~2021-05
Appears in Collections:	[Dept. of Environmental Engineering and Science (including master's program)] MOST Project

Files in This Item:

File	Description	Size	Format
1092622E041004CC2(第1年).pdf		863Kb	Adobe PDF	491	View/Open

Loading...