Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock

doi:10.1016/j.matchemphys.2017.12.011

Chia Nan University of Pharmacy & Science Institutional Repository > 藥理學院 > 化妝品應用與管理系(所) > 期刊論文 > Item 310902800/32205

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/32205

標題:	Enhanced reliability of LEDs encapsulated with surface-modified zirconia/silicone hybrids under thermal shock
作者:	Lin, Yen-Ting Li, Yen-Hsien Lei, I-Ann Kuo, Chih-Yu Lee, Chia-Fen Chiu, Wen Yen Don, Trong-Ming
貢獻者:	Natl Taiwan Univ, Dept Chem Engn Natl Taiwan Univ, Dept Mat Sci & Engn Natl Taiwan Univ, Inst Polymer Sci & Engn Chia Nan Univ Pharm & Sci, Dept Cosmet Sci Chia Nan Univ Pharm & Sci, Inst Cosmet Sci Tamkang Univ, Dept Chem & Mat Engn
關鍵字:	LED Silicone Zirconia Encapsulation Thermal shock
日期:	2018-02-15
上傳時間:	2019-11-15 15:45:07 (UTC+8)
出版者:	ELSEVIER SCIENCE SA
摘要:	This study focused on the importance of the interfacial adhesion in the zirconia (ZrO2)/silicone hybrids as the encapsulating material on the reliability of the LEDs. Surface-modified ZrO2 nanoparticles (m-ZrO2) with functional groups were prepared by a sol-gel reaction which could become reactive to the silicone resin. The produced m-ZrO2/silicone hybrid at 5 wt% had a refractive index of 1.569 at 633 nm and light transmittance of 98.9%. Moreover, the coefficient of thermal expansion was greatly reduced by the introduction of m-ZrO2 into the silicone resin. When using this m-ZrO2/silicone hybrid, the luminous flux of the LED was 10.1% higher than that using a neat silicone resin. Most importantly, the LEDs encapsulated with the m-ZrO2/silicone had the best performance under thermal shock among all the LEDs tested in this study, owing to its strong interfacial adhesion between the nanoparticles and matrix. Moreover, the thermal stresses developed in hybrids were calculated and found to agree with the performance evaluation of the encapsulated LEDs under thermal shock, in which the m-ZrO2/silicone hybrid had the lowest thermal stress. This study proposed that the m-ZrO2/silicone hybrid material with strong interfacial adhesion could be useful for the encapsulation of LEDs even under extreme thermal conditions. (C) 2017 Elsevier B.V. All rights reserved.
link:	http://dx.doi.org/10.1016/j.matchemphys.2017.12.011
關聯:	Kaohsiung Journal of Medical Sciences, v.206, pp.136-143
显示于类别:	[化妝品應用與管理系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	1182	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....