Removal of chemical oxygen demand from thin-film transistor liquid-crystal display wastewater using chitosan-coated bentonite: Isotherm, kinetics and optimization studies

doi:10.1016/j.jclepro.2017.12.052

Chia Nan University of Pharmacy & Science Institutional Repository > 環境永續暨休閒學院 > 環境資源管理系(所) > 期刊論文 > Item 310902800/32186

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/32186

標題:	Removal of chemical oxygen demand from thin-film transistor liquid-crystal display wastewater using chitosan-coated bentonite: Isotherm, kinetics and optimization studies
作者:	Ligaray, Mayzonee Futalan, Cybelle M. de Luna, Mark Daniel Wan, Meng-Wei
貢獻者:	Ulsan Natl Inst Sci & Technol, Sch Urban & Environm Engn Natl Res Ctr Disaster Free & Safe Ocean City Univ Philippines, Dept Chem Engn Chia Nan Univ Pharm & Sci, Dept Environm Resources Management
關鍵字:	Central composite design Chitosan-coated bentonite Chemical oxygen demand Optimization TFT-LCD wastewater Thermodynamics
日期:	2018-02-20
上傳時間:	2019-11-15 15:44:13 (UTC+8)
出版者:	ELSEVIER SCI LTD
摘要:	In this study, real thin-film transistor liquid-crystal display wastewater with an initial chemical oxygen demand (COD) concentration of 1348.00 ppm was treated using chitosan-coated bentonite (CCB). Characterization analysis of the CCB adsorbent was performed using Brunauer-Emmett-Teller surface area analysis, scanning electron microscopy, and Fourier-transform infrared spectrometer. The effect of parameters such as contact time, CCB dosage, pH and temperature on the COD removal was examined. Results show that increasing the contact time and CCB dosage increases COD removal efficiency while no considerable change was observed in removal efficiency with varying temperature and pH. Adsorption experiments showed that the removal of COD using CCB best fits the Langmuir isotherm (R-2 >= 0.9821) while kinetic data was best described by the pseudo-second order equation (R-2 >= 0.9980), which implies that chemisorption is the rate-determining step. Thermodynamic studies revealed that adsorption of COD onto CCB was spontaneous, exothermic (Delta H degrees = 5.95 kJ/mol) and decreased randomness in the system (Delta S degrees = -0.88 J/mol.K). Optimization studies using response surface methodology with central composite design was performed to determine the operating parameters that would yield the maximum COD removal. It was determined that the optimum conditions of 2032 h, 0.8 g CCB, pH 4.0, and 30 degrees C would yield a maximum removal of COD of 73.34%. (C) 2017 Elsevier Ltd. All rights reserved.
link:	http://dx.doi.org/10.1016/j.jclepro.2017.12.052
關聯:	Journal of Cleaner Production, v.175, pp.145-154
显示于类别:	[環境資源管理系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
10.1016-j.jclepro.2017.12.052.pdf		1173Kb	Adobe PDF	497	检视/开启
index.html		0Kb	HTML	1193	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....