Adsorptive removal of dibenzothiophene sulfone from fuel oil using clay material adsorbents

doi:10.1016/j.jclepro.2017.05.072

Chia Nan University of Pharmacy & Science Institutional Repository > 環境永續暨休閒學院 > 環境資源管理系(所) > 期刊論文 > Item 310902800/31694

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/31694

標題:	Adsorptive removal of dibenzothiophene sulfone from fuel oil using clay material adsorbents
作者:	Choi, Angelo Earvin Sy Roces, Susan Dugos, Nathaniel Arcega, Aries Wan, Meng-Wei
貢獻者:	De La Salle Univ, Chem Engn Dept Univ Ulsan, Ctr Clean Technol & Resource Recycling Univ Philippines Diliman, Dept Chem Engn Chia Nan Univ Pharm & Sci, Dept Environm Resource Management
關鍵字:	Activated clay Batch adsorption Bentonite Dibenzothiophene sulfone Kaolinite
日期:	2017-09-10
上傳時間:	2018-11-30 15:53:10 (UTC+8)
出版者:	Elsevier Sci Ltd
摘要:	Dibenzothiophene sulfone (DBTO) adsorption utilizing clay material adsorbents such as activated clay, bentonite and kaolinite were investigated in this study. The properties of each adsorbent were characterized using Fourier transform infrared spectroscopy, scanning electron microscope, Brunauer, Emmett and Teller surface area analyzer and zeta potential. The effects of pH (1.0-5.0), contact time (5 min -48 h), temperature (298-328 K) and initial concentration (10-1000 mg/L) were examined in a batch adsorption process to determine the suitability of clay material adsorbents in DBTO removal. Kinetic models of pseudo-first order, pseudo-second order and intraparticle diffusion were used to assess the experimental data. Results showed high correlation to the pseudo-second order kinetic model (R-2 > 0.99) that implies chemisorption as the rate-limiting step. Isotherm models of Langmuir, Freundlich, Temkin and Dubnin-Radushkevich were used to evaluate the equilibrium experimental data. DBTO adsorption showed a good fit towards the Freundlich isotherm (R-2 > 0.99) which indicates a heterogeneous adsorption onto the adsorbent. Thermodynamic studies indicated that DBTO adsorption onto clay Material adsorbents was endothermic. Utilizing the adsorbent of activated clay was spontaneous while kaolinite was non-spontaneous at 298-328 K. Bentonite was found to be only non-spontaneous at 298 K. Activated clay displayed a good potential in adsorbing sulfones to achieve low sulfur fuel oil in an oxidative desulfurization process. (C) 2017 Elsevier Ltd. All rights reserved.
關聯:	Journal of Cleaner Production, v.161, pp.267-276
显示于类别:	[環境資源管理系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	1632	检视/开启
j.jclepro.2017.05.072.pdf		1910Kb	Adobe PDF	0	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....