Adsorption of benzothiophene sulfone over clay mineral adsorbents in the frame of oxidative desulfurization

doi:10.1016/j.fuel.2017.05.070

Chia Nan University of Pharmacy & Science Institutional Repository > 環境永續暨休閒學院 > 環境資源管理系(所) > 期刊論文 > Item 310902800/31651

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/31651

標題:	Adsorption of benzothiophene sulfone over clay mineral adsorbents in the frame of oxidative desulfurization
作者:	Choi, Angelo Earvin Sy Roces, Susan Dugos, Nathaniel Wan, Meng-Wei
貢獻者:	De La Salle Univ, Dept Chem Engn Univ Ulsan, Ctr Clean Technol & Resource Recycling Chia Nan Univ Pharm & Sci, Dept Environm Resources Management
關鍵字:	Activated clay Batch adsorption Bentonite Benzothiophene sulfone Oxidative desulfurization Kaolinite
日期:	2017-10-01
上傳時間:	2018-11-30 15:51:36 (UTC+8)
出版者:	Elsevier Sci Ltd
摘要:	The adsorption of benzothiophene sulfone (BTO) from model fuel oil was investigated using three different clay mineral adsorbents. The adsorption characteristics of clay mineral adsorbents such as activated clay, bentonite and kaolinite were evaluated using Fourier transform infrared spectroscopy and Brunauer, Emmett and Teller surface area analyzer. A batch process was conducted to determine the adsorption performances" at varying contact time, reaction temperature and initial concentration. Increasing adsorption capacities followed the order of kaolinite < bentonite < activated clay. The equilibrium isotherms using Langmuir and Freundlich models yielded a good fit (R-2 > 0.98) indicating a monolayer and heterogeneous adsorption. A second order reaction kinetic model showed high suitability (R-2 > 0.97) based on the experimental data. Results showed that adsorption follows a two-step process: (1) fast adsorption rate for the first two hours and (2) markedly slow adsorption rate until equilibrium. The clay minerals have different functional groups present in its surface which determines the essential adsorption characteristics. The thermodynamic parameters for BTO adsorption onto clay mineral adsorbents indicated an endothermic reaction. Activated clay and kaolinite were spontaneous and non-spontaneous, respectively, while bentonite was found to be only non-spontaneous at 25 degrees C. In comparison with conventional adsorbents, activated clay was found to be superior in the application of sulfone adsorption in fuel oil. (C) 2017 Elsevier Ltd. All rights reserved.
關聯:	Fuel, v.205, pp.153-160
显示于类别:	[環境資源管理系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	1484	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....