English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18240/20438 (89%)
造訪人次 : 5454542      線上人數 : 1085
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/30910


    標題: Competitive Fixed-Bed Adsorption of Pb(II), Cu(II), and Ni(II) from Aqueous Solution Using Chitosan-Coated Bentonite
    作者: Tsai, Wan-Chi
    de Luna, Mark Daniel G.
    Bermillo-Arriesgado, Hanna Lee P.
    Futalan, Cybelle M.
    Colades, James I.
    Wan, Meng-Wei
    貢獻者: Kaohsiung Med Univ, Dept Med Lab Sci & Biotechnol
    Univ Philippines, Dept Chem Engn
    Univ Philippines, Environm Engn Program, Natl Grad Sch Engn
    Aecom Philippines Consultants Corp, Environm Business Line
    Chia Nan Univ Pharm & Sci, Dept Environm Resources Management
    關鍵字: activated carbon
    breakthrough curves
    metal-ions
    biosorption column
    cadmium removal
    methylene-blue
    tannic-acid
    cement iocc
    water
    montmorillonite
    日期: 2016
    上傳時間: 2018-01-18 11:37:45 (UTC+8)
    出版者: Hindawi Ltd
    摘要: Fixed-bed adsorption studies using chitosan-coated bentonite (CCB) as adsorbent media were investigated for the simultaneous adsorption of Pb(II), Cu(II), and Ni(II) from a multimetal system. The effects of operational parameters such as bed height, flow rate, and initial concentration on the length of mass transfer zone, breakthrough time, exhaustion time, and adsorption capacity at breakthrough were evaluated. With increasing bed height and decreasing flow rate and initial concentration, the breakthrough and exhaustion time were observed to favorably increase. Moreover, the adsorption capacity at breakthrough was observed to increase with decreasing initial concentration and flowrate and increasing bed height. The maximum adsorption capacity at breakthrough of 13.49 mg/g for Pb(II), 12.14 mg/g for Cu(II), and 10.29 mg/g for Ni(II) was attained at an initial influent concentration of 200 mg/L, bed height of 2.0 cm, and flow rate of 0.4 mL/min. Adsorption data were fitted with Adams-Bohart, Thomas, and Yoon-Nelson models. Experimental breakthrough curves were observed to be in good agreement (R-2 > 0.85 and E% < 50%) with the predicted curves generated by the kinetic models. This study demonstrates the effectiveness of CCB in the removal of Pb(II), Cu(II), and Ni(II) from a ternary metal solution.
    關聯: International Journal of Polymer Science, 1608939
    顯示於類別:[環境資源管理系(所)] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    30910.pdf2500KbAdobe PDF303檢視/開啟
    index.html0KbHTML1582檢視/開啟


    在CNU IR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋