Chia Nan University of Pharmacy & Science Institutional Repository:Item 310902800/29636
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18076/20274 (89%)
造訪人次 : 4908357      線上人數 : 882
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/29636


    標題: Exposure Hazard to Bisphenol A for Labor and Particle Size Distribution at Polycarbonate Molding Plants
    作者: Chao, Yuchan
    Chen, Jinluh
    Yang, Weinduo
    Ho, Tsunghan
    Yen, Fusan
    貢獻者: 職業安全衛生系
    關鍵字: Bisphenol A
    Polycarbonate
    Respiratory tract
    Particle size distribution
    日期: 2015-06
    上傳時間: 2016-04-19 19:02:50 (UTC+8)
    出版者: Iranian Scientific Society Medical Entomology
    摘要: Background: This research provides an insight into exposure information and particle size distributions of Bisphenol A (BPA), a common environmental hormone, at polycarbonate (PC) molding plants in southern Taiwan.Methods: The inhalable dust sampler as IOM and the micro- orifice uniform deposition impactor (MOUDI) were used for samples collection to evaluate the level and particle size distribution of BPA in PC molding plants. All collected samples were analyzed by high performance liquid chromatography (HPLC) for BPA concentrations.Results: BPA concentrations detected from the plant using optical grade PC material ranged from 32.28 to 44.97 mu g/m(3), which were significantly higher than BPA concentrations (16.16 to 19.39 mu g/m(3)) detected from the plant using food grade PC material. Under working environment, the particle size distribution showed a single mode distribution, with a MMAD of 0.84 mu m and a GSD of 1.97. Emission of BPA increased during heating process and most of BPA particles deposited in the nasal cavity (63.37%), following by alveolus (30.7%), and trachea- bronchus (5.93%).Discussion: It is of importance that proper personal protection should be taken upon the BPA particulates released during the molding process at PC molding plants.
    關聯: Iranian Journal of Public Health, v.44 n.6, pp.783-790
    顯示於類別:[職業安全衛生系(含防災所)] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    29636.pdf389KbAdobe PDF489檢視/開啟
    index.html0KbHTML2523檢視/開啟


    在CNU IR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋