快速混合輔助氧化脫硫技術應用於廢棄物資源化再利用之研究

CNU IR > College of Sustainable Environment and Recreation > Dept. of Environmental Engineering and Science (including master's program) > Dissertations and Theses > Item 310902800/29164

Please use this identifier to cite or link to this item: https://ir.cnu.edu.tw/handle/310902800/29164

Title:	快速混合輔助氧化脫硫技術應用於廢棄物資源化再利用之研究 The High-Speed Mixing Assisted Oxidative Desulfurization Technology and its Study applied to Wasted Energy Recovery and Reuse
Authors:	陳政宏
Contributors:	環境工程與科學系萬孟瑋
Keywords:	乾淨能源氧化脫硫快速混合 Oxidative Desulfurization High-Speed Mixing Clean Energy
Date:	2014
Issue Date:	2015-10-26 20:25:40 (UTC+8)
Abstract:	摘要本研究以廢潤滑油精鍊再生之燃料油，廢潤滑油淨化再生之燃料油及廢輪胎熱裂解再生後之燃料油，做為實驗油品應用於快速混合輔助氧化脫硫方法，結合高剪斷力作用(乳化頭)、相間轉移作用(溴化四辛基銨)及過渡金屬催化氧化反應(鎢磷酸、過氧化氫)進行氧化，並配合固體吸附劑(活性碳、活性白土、活性氧化鋁)將Sulfone自油品中去除，而生產出低硫份油品，以達成資源再利用及生產乾淨能源為目的。氧化實驗中利用高剪斷力作用時間差異，固定的油品/過氧化氫之比例，配合上不同的鎢磷酸、溴化四辛基銨之加藥量。研究結果得知，對於有機硫化物的氧化情形，隨著鎢磷酸、溴化四辛基銨、高剪斷力作用時間的增加，對於有機硫化物的氧化效??為增加的趨勢。以等量的油品/過氧化氫(100毫升︰100毫升)，配合上不同比例的(鎢磷酸︰溴化四辛基銨：高剪斷力作用時間)，其最佳氧化參數為：廢潤滑油精鍊再生之燃料油為(0.5克：0.5克：20分鐘)，廢潤滑油淨化再生之燃料油為(0.5克：0.5克：20分鐘)，廢輪胎熱裂解再生後的燃料油為(1克：1克：60分鐘)。吸附實驗中使用活性碳、活性氧化鋁、活性白土為主要吸附材料，利用Langmuir 與Freundish 等溫吸附模式探討，實驗數據顯示：三種吸附劑(活性碳、活性氧化鋁、活性白土)等皆吸附劑皆符合Langmuir 等溫吸附模式，R2值均可達0.95 以上；在Freundish 等溫吸附模式下可以得知其重要參數n 值皆大於1，研究中亦證明了三種不同之吸附劑對於Sulfone具有良好的吸附現象產生。在動力學模式下探討，各種吸附劑均屬於擬二階動力吸附。在不同之溫度下進行吸附，具有不同的吸附量，在55°C時各種吸附劑的吸附量為最小。 ABSTRACT In this study, the regenerations of recovered waste lubricating oil, refined waste lubricating oil, and waste tire recovered pyrolysis oil were studied. The rapid mixing experiments assisted oxidative desulfurization method, combined with high shear force, the phase transfer effects (tetraoctylammonium bromide) and the transition metal catalysis (tungstophosphoric acid, hydrogen peroxide) was executed in wasted oil purification. The solid adsorbents, such as activated carbon, activated clay, activated alumina, were also examined for sulfone removed from the oil to obtain the production of low-sulfur oil, thus, it could achieve the reuse and re-production of clean energy from wasted resources. Oxidation experiments were conducted using high shear force of the time difference, a fixed oil/proportion of hydrogen peroxide, and the dosages of catalysts and surfactants. This research suggests that the oxidation of organic sulfur compounds under the tungstophosphoric acid and tetraoctylammonium bromide increased duration of action by high shear forces, where the oxidation efficiency of the organic sulfur compounds is more increased. With the same amount of oil/hydrogen peroxide (100 mL:100 mL) under different proportions of (tungstophosphoric acid: tetraoctylammonium bromide: duration of action of high shear force), the optimum oxidation parameters are as below: recovered waste lubricating oil is 0.5 g:0.5 g:20 minutes, the refined waste lubricating oil is 0.5 g:0.5 g:20 minutes, waste tire recovered pyrolysis oil is 1 g:1 g:60 minutes. Adsorption experiments using activated carbon, activated alumina, activated clay as the main adsorbents were utilized to examine the Freundish and Langmuir adsorption isotherm model. The experimental data indicated that these three adsorbents are fitted with the Langmuir isotherm model, where the R2 value could reach 0.95. Under the Freundish isotherm, it could be learned that an important parameter n values were all greater than 1. Moreover, this study also indicated that these three adsorbents illustrated good adsorption phenomenon for Sulfone removal. In the dynamic model, the various adsorbents were confirmed with the proposed second-order kinetic adsorption. Considering the temperature effect, these three adsorbents illustrated different adsorption capacity at various temperature, where the minimum adsorption capacity was confirmed at 55?C.
Relation:	校內公開：2014-09-01;校外公開：2019-09-01，學年度：102，119頁
Appears in Collections:	[Dept. of Environmental Engineering and Science (including master's program)] Dissertations and Theses

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	1522	View/Open

Loading...