Taguchi Optimization for Tool Wear Using Fuzzy Deduction

doi:10.1080/09720510.2011.10701590

Chia Nan University of Pharmacy & Science Institutional Repository > 環境永續暨休閒學院 > 應用空間資訊系(所) > 期刊論文 > Item 310902800/26973

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/26973

標題:	Taguchi Optimization for Tool Wear Using Fuzzy Deduction
作者:	Lan, Tian-Syung Hsu, Kuei-Shu
貢獻者:	應用空間資訊系
關鍵字:	computer numerical control Taguchi method fuzzy deduction optimization tool wear
日期:	2011-09
上傳時間:	2013-10-14 14:57:43 (UTC+8)
出版者:	Taylor & Francis
摘要:	In this paper, four parameters (cutting depth, feed rate, speed, tool nose runoff) with three levels (low, medium, high) are considered to optimize the tool wear for CNC (computer numerical control) finish turning based on L 9(34) orthogonal array. Additionally, twenty- seven fuzzy control rules using trapezoid membership function with respective to seventeen linguistic grades for tool wear are constructed. Considering thirty input and eighty output intervals, the defuzzification using center of gravity is moreover completed. Through the Taguchi experiment, the optimum fuzzy deduction parameters can then be received. The confirmation experiment for optimum deduction parameters is furthermore performed on an ECOCA-3807 CNC lathe. It is shown that the tool wear ratio from the fuzzy deduction optimization parameters is significantly advanced comparing to that from the benchmark. This paper not only proposes a parametric deduction optimization scheme using orthogonal array, but also contributes the satisfactory fuzzy approach to the tool wear for CNC turning with profound insight.
關聯:	Journal of Statistics & Management Systems , 14(5), pp.885-898
显示于类别:	[應用空間資訊系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	2172	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....