A General Innovation Optimization Using TRIZ

doi:10.1080/02522667.2010.10700014

Chia Nan University of Pharmacy & Science Institutional Repository > 環境永續暨休閒學院 > 應用空間資訊系(所) > 期刊論文 > Item 310902800/25247

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/25247

標題:	A General Innovation Optimization Using TRIZ
作者:	Tian-Syung Lan Kuei-Shu Hsu Ming-YungWang
貢獻者:	應用空間資訊系
關鍵字:	Theory of inventive problem solving cutting noise computerized numerical control
日期:	2010-09
上傳時間:	2012-05-23 15:46:43 (UTC+8)
摘要:	Machining noise is a major safety and health concern for the Computerized Numerical Control (CNC) industry. The existing optimization researches are basically focused on the projects under specific statuses, and achieved through massive operations of process equipments. Thus, the development of general innovation optimization technique is absolutely necessary. In this study, machining speed, feed rate, cutting depth and tool nose runoff are selected as control factors for machining noise in CNC turning. Based on the literature review, the TRIZ (Theory of Inventive Problem Solving) is additionally utilized to analyze 39 engineering parameters and to define the improvement as well as worsening factor of machining noise. Moreover, the noise optimization strategy received from TRIZ is then experimentally applied to confirm the effectiveness of this study. It is shown that the cutting noise can be properly enhanced by using our proposed innovation technique. This study not only contributes a general innovation noise optimization scheme for the CNC machining industry without repeated equipment operations, but also provides the reference basis for the field.
關聯:	Journal of Information and Optimization Sciences 31(5)：p.1103-1111
显示于类别:	[應用空間資訊系(所)] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	2415	检视/开启

在CNU IR中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....