Chia Nan University of Pharmacy & Science Institutional Repository:Item 310902800/24570
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 18076/20274 (89%)
造訪人次 : 5304595      線上人數 : 1379
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/24570


    標題: 以生命週期評估探討聚乳酸替代一次性產品之環境效益
    Polylactic acid Substituting for Disposable Products Investigation on Environmental Benefit by Life Cycle Assessment
    作者: 陳國忠
    貢獻者: 嘉南藥理科技大學：環境工程與科學系暨研究所
    楊英賢
    關鍵字: 碳足跡
    TRIZ
    綠色設計
    聚乳酸
    生命週期評估
    Green design
    Polylactic acid
    Life cycle assessment
    carbon footprint
    日期: 2011
    上傳時間: 2011-10-26 11:19:31 (UTC+8)
    摘要: 基於一次性產品造成資源消耗及廢棄物產生的問題，本研究以生命週期評估方法，探討生物可分解塑膠-聚乳酸(Polylactic Acid, PLA)與傳統塑膠之環境效益及產品材料替代策略之環境價值。其環境議題分別包括能源消耗、溫室氣體及其他環境衝擊議題之生命週期評估。其研究結果主要包含兩部份：第一部份，聚乳酸與傳統塑膠之生命週期評估之差異；第二部份，探討一次性產品之碳足跡，並以綠色設計思維與TRIZ創新原理，研究聚乳酸應用之產品環境效益。其研究結果包含如下：
    1. 聚乳酸原料生產系統之生命週期評估，能源消耗以PLANG較優(45.5 MJ)，次為PLA2006(57.8 MJ)；溫室效應以PLANG(-0.78 KgCO2-eq.)較為優勢，其次為PLA2006(0.09 KgCO2-eq.)。
    2. 聚乳酸應用於寶特瓶之生命週期評估，其能源消耗值為 1160 MJ，比傳統塑膠PET(1820 MJ)、HDPE(1340 MJ)、PP(1250 MJ)，較低；溫室效應PLA值49.4 KgCO2-eq.，仍低於傳統塑膠。
    3. 水族過濾資材綠色設計分析，應用產品生命週期之碳足跡評估，其PLA原料替代及焚化處理情境可降低0.189 Kg CO2-eq.，約減少了5.32%。
    4. 一次性尿布經聚乳酸材料替代，每包尿布改善前後之差異，可減少0.861~1.73Kg CO2-eq.，減量比例分別約為19.4%。
    5. 用完即丟原子筆溫室氣體排放約0.049KgCO2-eq.，筆芯替換式 0.064 KgCO2-eq.，產品創新設計後以PLA作為原料替代，其值為NDP-PLA 0.029Kg CO2eq.。
    This study is based on the resource consumption of disposable products and the problem of waste generation. The methods of life cycle assessment and green design were applied to the biodegradable plastic that used Polylactic acid (PLA) as the raw materials. The result indicated the environmental benefit of raw material and better life cycle assessment of PLA plastic compared with convetional plastic in Taiwan, and the environmental benefits of PLA as a part of green design and TRIZ methods to get the disposable products. The main results are as follows:
    1. Life cycle assessment of PLA material production system, the energy consumption of PLANG was 45.5 MJ, PLA2006 was 57.8MJ, greenhouse gas impact of PLANG was -0.78 KgCO2-eq..
    2. The life cycle assessment of its energy consumption of one thousand bottle the used PLA, conventional plastic PET,HDPE, and PP were 1160 MJ, PET 1820 MJ, HDPE 1340 MJ, PP 1250 MJ, respectively. PLA produced greenhouse gas compared with less than conventional plastic.
    3. In case of the green design of PET fiber and Application product carbon footprint assessment, the PLA material substituted and incinerated, reduced 1.89E-01 Kg CO2-eq. that was equal about 5.32%.
    4. PLA substitution material of disposable nappies, the greenhouse gases reduction effect are with 0.861~ 1.73 Kg CO2-eq. and reduction ratio are about 19.4%, respectively.
    5. For disposable pen, greenhouse gas emissions was about 0.049KgCO2-eq., and for re-use pen was 0.064 KgCO2-eq., The Product innovation after the PLA was used as an alternative raw material, its value is NDP-PLA 0.029Kg CO2eq..
    關聯: 校內外完全公開，學年度：99，155頁
    顯示於類別:[環境工程與科學系(所)] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML1981檢視/開啟


    在CNU IR中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋