槽縫剪力牆與架構間非線性亙制型為之研究

Chia Nan University of Pharmacy & Science Institutional Repository > 嘉南學報 > 13期 (1987) > Item 310902800/24403

請使用永久網址來引用或連結此文件: https://ir.cnu.edu.tw/handle/310902800/24403

標題:	槽縫剪力牆與架構間非線性亙制型為之研究 Studies on the Nonlinear Interactions Between Slitted Shear Wall and Frames
作者:	劉玉文
貢獻者:	工業衛生安全科
關鍵字:	槽縫剪力牆牆柱展性高層建築韌度 Slitted shear wall, Wall-column Ductile High-rise building
日期:	1987
上傳時間:	2011-10-24 14:27:30 (UTC+8)
摘要:	槽縫剪力牆是將傳統之剪力牆以槽縫牆體分隔成一系列之牆柱體，其目的在改良既剛又脆之傳統剪力牆，使成為剛度稍減但韌度大增之展性剪力牆，對高層建築提供良好之抗震效果。本文利用拙著(1)所建立之槽縫剪力牆剛度變化模式，對中低層與高層建築進行非線性應力分析，藉以探討槽縫剪力牆與架構間之互制行為。由分析結果發現牆體開槽以後，結構整體之剛度較軟，其吸收之能量較多，韌性較佳。在中低層建築(5樓層)實例中，水平側向位移較無槽者增加14 %~18 % ;韌度較無槽者增加15 %~84%。在高層建築 ( 20層樓)實例中，混合式槽縫剪力牆之水平側向位移較無槽者增加10 %~45% ;韌度較無槽者增加12 %~ 60 %。在牆與構架之互制行為中，開槽牆體因剛度較小，對水平外力之分擔率下降較無槽牆體為快。 The slitted shear wall has several vertial slits around mid-height of a wall, These slits changes the structural characteristics of a rigid but brittle shear wall ( conventional wall ) into a ductile shear wall ( slitted wall ). Using the empirical rules of low-rise R.C. slitted shear walls(1), the nonlinear static interactions between frame with shear wall were analyzed by using Chen’s program(2). Vertial loads wer applied incrementally until total collapse of the structure. During each loading stage, the stiffndss of beams and columns were modified according to the effective moment of inertia specified in ACI code. While the stiffness of slitted shear wall was modified by the rules set up in my paper(1). From the results of computer analysis, the ductility of framemes with slitted shear walls were much better than that of frames with non- slitted shear walls, although the ultimate horizontal loads were about the same.
關聯:	嘉南學報 13：p.23-38
顯示於類別:	[嘉南學報] 13期 (1987) [職業安全衛生系(含防災所)] 期刊論文

文件中的檔案:

沒有與此文件相關的檔案.

在CNU IR中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....