Chia Nan University of Pharmacy & Science Institutional Repository:Item 310902800/21376
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 18034/20233 (89%)
Visitors : 24038105      Online Users : 304
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    CNU IR > Chna Nan Annual Bulletin > No.29 (2003) >  Item 310902800/21376
    Please use this identifier to cite or link to this item: https://ir.cnu.edu.tw/handle/310902800/21376


    Title: 以相位差顯微鏡法測定石綿工廠周界環境空氣中石綿濃度之研究
    Determination of Airborne Asbestos Concentration Nearby the Asbestos-Related Factories by Using Phase Contrast Microscopy
    Authors: 葉慧容
    毛義方
    陳美蓮
    陳連輝
    Contributors: 嬰幼兒保育系
    職業安全衛生系
    Keywords: 相位差顯微鏡
    周界
    纖維計數
    phase contrast microscopy
    nearby
    fiber count
    Date: 2003
    Issue Date: 2009-06-11 13:32:15 (UTC+8)
    Abstract: 相位差顯微鏡鏡檢方法是目前石綿作業環境空氣中分析應用最廣者,本研究根據我國環保署所公告之空氣類檢測方法「石綿工廠排放管道及其空氣中石綿檢測法」(NIEA A424.10T),針對三家水泥石綿浪板工廠及六家剎車來令工廠測定其周界環境空氣中石綿濃度,共取得58個樣本,其中1個樣本因背景粉塵值過高而無法計數,一家工廠附近有毛紡織廠,其15個樣本之石綿濃度有高估現象,故有效樣本數總計42個,石綿濃度平均值為0.02 fiber/mL,下風處採樣位置的纖維濃度有較高的趨勢。樣本中有98%之鏡檢纖維密度未達建議方法中規定100~1300 fiber/mm2,故計數的相對偏差理論值較NIOSH 7400法0.11~0.13為高,顯示計數纖維的變異性較大,測定結果有較大誤差。本方法雖不能真正測得石綿工廠周界空氣中石綿濃度,但仍可作為石綿非職業暴露
    的參考指標。
    Phase contrast microscopy (PCM) is widely used to measure of asbestos concentration in the workplace. The objective of this study was to determine the airborne asbestos concentration in neighborhood of the asbestos-related factories by PCM. Nine factories, 3 asbestos cement and 6 brake, were investigated, and a total of 58 air samples were collected, in which 42 samples were valid with average concentration of 0.02f/mL. The results showed that the concentrations of asbestos fiber in downwind areas were seemingly higher than those of other collected areas, and were depended on the sampling time and atmospheric conditions. Ninety-eight percents of the valid samples in the asbestos fiber density didn’t meet the requirement of NIEAA424.10T code. The standard deviations of the counting precision were more than 0.11~0.13 which required by NIOSH 7400 code. Although the proposed procedure had higher variability in the fiber counting and could not precisely determine the concentration of airborne asbestos, it could be a preliminary method to assessment the asbestos fiber concentration on the non-occupational exposure.
    Relation: 嘉南學報(科技類)29期:p.184-192
    Appears in Collections:[Chna Nan Annual Bulletin] No.29 (2003)
    [Dept. of Childhood Education and Nursery] Periodical Articles
    [Dept. of Occupational Safety] Periodical Articles

    Files in This Item:

    File Description SizeFormat
    v29_184_192.pdf59KbAdobe PDF699View/Open


    All items in CNU IR are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback