擔體氧化鈰觸媒催化含酚廢水濕式氧化反應之研究-反應條件之影響

CNU IR > Chna Nan Annual Bulletin > No.37 (2011) > Item 310902800/25415

Please use this identifier to cite or link to this item: https://ir.cnu.edu.tw/handle/310902800/25415

Title:	擔體氧化鈰觸媒催化含酚廢水濕式氧化反應之研究-反應條件之影響 An Assessment of the reaction conditions for the CWAO of phenolic wastewater via supported ceria catalyst
Authors:	陳煜斌林秀雄賴重儒李易聲
Contributors:	嘉南藥理科技大學環境工程與科學系
Keywords:	觸媒濕式氧化擔體鈰觸媒含酚廢水反應條件誘導期 CWAO CeO2/-Al2O3 phenolicwastewater reactionconditions inductionperiod
Date:	2011-12
Issue Date:	2012-06-08 11:08:02 (UTC+8)
Abstract:	本研究利用含浸法合成不同擔體之CeO2 擔體觸媒，測試在不同反應條件對於含酚廢水濕式氧化反應之影響，並以此實驗篩選出最佳擔體觸媒與最適操作條件。研究結果顯示，在所測試擔體(-Al2O3、SiO2、TiO2、Active carbon)中，以CeO2/-Al2O3 活性最好，Ce 含浸量16.7wt.%、反應溫度180℃、酚濃度1000ppm、觸媒添加量3g/L、氧分壓1.5MPa 時，反應4 小時之酚轉化率將近40%，COD 去除率可達30%；而無添加觸媒之WAO 反應4 小時酚轉化率僅約為6%，COD 去除率約2%，證實添加CeO2/-Al2O3 觸媒確實有其催化效能。本研究後續實驗利用此觸媒，經過整體反應效能評估最適操作條件為：Ce 含浸量15wt.%、反應溫度200℃、酚濃度1000ppm、觸媒添加量1g/L、氧分壓1.5MPa，反應2 小時可達酚轉化率95%，COD 去除率70%。此外本試驗亦有誘導期之現象產生，由實驗發現反應溫度由180℃提升至200℃可使誘導期由4 小時縮減至1 小時。 In this study, we prepared several supported ceria catalysts (supporter: -Al2O3, SiO2, TiO2 and Active carbon) via impregnation method for the CWAO of phenol to assess performance of supported ceria catalyst. By the rate of phenol conversion and the efficacy of COD removal, CeO2/-Al2O3 was found to be the most active catalyst among the four tested. At 180°C, O2 partial pressure of 1.5MPa and 3.0g/L CeO2/-Al2O3 (Ce content 16.7wt.%) catalyst loading, with phenol concentration of 1000ppm, could attain about 40% phenol conversion and 30% COD removal, after 4 hrs reaction. Under the same conditions, effectiveness of reaction without catalyst was only about 6% phenol conversion and 2% COD removal, showing that the CeO2/-Al2O3 catalyst is a feasible alternative to CeO2 for the CWAO of phenol because it remains an effective catalyst and is cheaper to be prepared. The optimal reaction condition of CWAO of phenolic wastewater using CeO2/-Al2O3 catalyst with 15wt.% Ce content is as follows: 200°C, 1.5MPa O2 and 1.0g/L catalyst loading. With the optimal condition, 1000ppm phenolic solution, after 2 hrs reaction, could attain about 95% phenol conversion and 70% COD removal. Moreover, the induction period was found in the reaction, which was 4 hrs at 180°C and 1 hrs at 200°C.
Relation:	嘉南學報(科技類) 37期：p.104-112
Appears in Collections:	[Chna Nan Annual Bulletin] No.37 (2011) [Dept. of Environmental Engineering and Science (including master's program)] Periodical Articles

Files in This Item:

File	Size	Format
37_104_112.pdf	1560Kb	Adobe PDF	1699	View/Open

Loading...