FeIII supported on resin (FeIII-resin) as an effective catalyst for peroxide oxidation was prepared and applied for the degradation of p-nitrophenol (PNP). Catalytic wet peroxide oxidation (CWPO) experiments with hydrogen peroxide as oxidant were performed in a batch rector with p-nitrophenol as the model pollutant. Under given conditions (PNP concentration 500 mg/L, H2O2 0.1 M, 80�C, resin dosage 0.6% g/mL), p-nitrophenol was almost completely removed, corresponding to an 84% of COD removal. It was found that the reaction temperature, oxidant concentration. and initial pH of solution significantly affected both p-nitrophenol conversion and COD removal by oxidation. It can be inferred from the experiments that FeIII supported on resin was an effective catalyst in the mineralization of p-nitrophenol. In an acidic environment of oxidation, the leaching test showed that there was only a slight leaching effect on the activity of catalytic oxidation. It was also confirmed by the aging test of catalysts in the oxidation. [ABSTRACT FROM AUTHOR].
Copyright of Water Science & Technology is the property of IWA Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.