Chia Nan University of Pharmacy & Science Institutional Repository:Item 310902800/23041
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 16974/19261 (88%)
造访人次 : 7677732      在线人数 : 306
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.cnu.edu.tw/handle/310902800/23041


    標題: Squeezing Flow Models of Thermoplastic Filament Winding
    纏繞熱塑性塑膠之擠壓流動模型
    作者: Hong-Ru Lin
    貢獻者: 應用化學科
    關鍵字: Squeezing flow
    Modeling
    Thermoplastic composite materials
    Filament winding
    擠壓流動
    模型化
    熱塑性塑膠複合材料
    連續捲纏法
    日期: 1995
    上傳時間: 2010-10-06 14:12:20 (UTC+8)
    摘要: Squeezing flow was adopted to model the processing of thermoplastic composite materials in filament winding. In the first model, a no-slip boundary condition is assumed to exist at both the free and bonding surface. It is found that the no-slip conditions cause the most flow restriction,thus the longest process times. In the second model, however, it combines slip flow at the free surface with no-slip flow at the bonding surface. It is found that the resin flow is facilitated due to the slip condition, thus reducing the process times. Parametric curves were also reported for both models to show the effects of degree of compaction or variation of the resin viscosity on suggested feedrate.
    本文採用擠壓流動以模擬利用連續捲纏法加工熱塑性塑膠複合材料。於第一個模型中,假設在自由及黏合表面無滑移現象。此邊界條件限制大部分的樹脂流動,因此需要最長的加工時間。但於第二個模型中,假設在自由表面有滑移現象,而在黏合表面則無滑移。由於滑移邊界條件之存在進而促進樹脂之流動,因此縮短加工時間。本文並提供一些參數曲線以說明改變壓縮程度及樹脂黏度對纏繞速度之影響。
    显示于类别:[嘉南學報] 21期 (1995)
    [醫藥化學系 ] 期刊論文

    文件中的档案:

    没有与此文件相关的档案.



    在CNU IR中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈